Classes

SCX Digital 1/32

 

We are brand new to SCX Digital racing so we're following the basic 'Keep it Simple' method for now.  We are only racing one class of car in this format which is a stock, out-of-the-box NASCAR Nationwide Series car as pictured above.  NO MODIFICATIONS ARE ALLOWED TO THE CAR.  However we will encourage everyone to paint and decal their cars to their personal preferences.  As we learn more about this format we will be sure to add classes allowing drivers to tweak the cars.

1/24 Dirt Late Model

The 1/24 scale dirt late model is the staple of the Rolling Hills Speedway.  We encourage creativity in this class as drivers are allowed to engineer their own chassis or use a store bought chassis.

Body:  Standard UMP appearing vacuum mold styrene available at Hotlapsracin.com.  Similar bodies will be approved on an individual basis.

Chassis:  Any allowed as long as it is a rigid design (no flexi or articulating chassis)  4 or 4.5 inch wheel base

Wheels/Tires:  Pro-trac Daytona Stockers or H&R, 7/8" diameter minimum. All four tires must touch the track when the car is at rest.  Front wheels may roll independently but must be on a single solid axle.  Tires must be dry when on the track.

Guide Flag:  One allowed, must be plastic and rounded on both ends.

Motor:  Falcon 7 Part # JK 30207
No Axle Bearings are allowed.  1/8" Axles.
All cars must have a rear bumper constructed of 1/8"-3/16" diameter brass, steel or plastic.
Chassis must be 1/16" minimum above track surface.

1/24 Street Stock

Every track needs a basic stock car division and the Street Stocks fit this bill at the Rolling Hills Speedway.  Again, this class allows a variety of chassis but they must remain in the stock form from the manufacturers.
Body:  1/24 or 1/25 scale plastic model body or resin pour of an American made street vehicle from 1952-1982.  Wheel wells may be radiused to allow for tire clearance.  Body reinforcements may be constructed of plastic and glue only!
Chassis:  H&R, Pro-track, or FCR.  Front axle mount may be moved to fit wheel base to body.
Tires:  Pro-track Daytona Stockers or H&R foam.  7/8" diameter minimum.
Motor:  Falcon 7 Part # JK 30207
Driver Figure Required
Bumpers and rub rails may be constructed of brass or plastic
No axle bearings allowed
Chassis must be 1/16" minimum above track surface

Sprint Cars

Class rules under developement